Shifter Module Manual

Module Overview

• Authentic button feel - Modified from BMW genuine parts, refined aluminum alloy housing
• Immersive experience - Uses BMW operation method, perfectly compatible with ETS2 and ATS
• Built-in low-frequency vibration unit - Works with Simhub software for driving operation vibration feedback
• Rich status lights - Handle status lights perfectly sync with game
• V2 version built-in handle reset motor - When in M/S mode, pressing P gear will automatically move handle from M/S mode back to normal mode and enter P gear
• Easy installation - Front and rear screw slots for easy mounting to profiles
• Connect via ribbon cable to controller box designated port (A/M)
• Requires 12V power supply for vibration, ambient lighting, and handle reset functions

Game Settings

Must set transmission to Real Automatic for proper operation

Verify Shortcuts

The Shifter Module requires corresponding shortcuts. It will not work properly without correct configuration

Auto Mode - D Gear and N Gear

• D Gear - Pull handle to shift from N to D (Drive)
• N Gear - Push handle to shift from D to N (Neutral)

Auto Mode - R Gear

• Enter R Gear - Stop vehicle completely, hold UNLOCK button, then push handle to enter R gear (Reverse)
• Exit R Gear - Pull handle to enter N gear, hold pull to enter D gear

M/S Mode

• Enter M/S Mode - First enter D gear, then move handle left to enter M/S gear (Manual Sequential Mode)
• Exit M/S Mode - Move handle right to enter D gear (Auto mode, D gear Drive)

M/S Mode Gear Adjustment

• In M/S mode, move handle forward/backward to shift from 1st to highest gear

P Gear

• Enter P Gear - Stop vehicle, press P gear button to enter P gear
• Exit P Gear - Hold UNLOCK button, pull handle to exit P gear
• In M/S mode, pressing P gear will automatically move handle right to Auto mode, then activate P gear

Troubleshooting