Thrustmaster T598P Installation Guide

1

Bracket Assembly

Connect the two parts of the universal bracket and supplementary bracket with two M6 countersunk screws.

💡 Do not reverse the universal bracket direction

Universal Bracket

Supplementary Bracket

2

Base Assembly

Combine the bracket with the base, pay attention to installation sequence. Align the BlackHole module with the universal bracket and insert, tighten the 4 hand-tightened nuts on the back.

💡 Install T598P nuts in the direction shown in the picture

Alignment Position

3

Disassemble Quick Release

Remove 5 screws to easily disassemble the original quick release.

5 Fixing Screws

4

Install Extension Shaft

The steering wheel needs an extension shaft installed. Align the extension shaft with the original quick release, connect the extension cable, use long screws to fix the quick release.

⚠️ Make sure the extension cable is not pinched by the quick release, carefully reconnect the circuit board

Extension Shaft Connection

5

Position the Cam

Only install one reset cam, peel off the adhesive tape and attach, pay attention to direction. Reference the quick release for angle, note the relationship between cam and quick release angle.

💡 The reset cam may not be secure initially, use rubber band to fix for 3 days to improve adhesion

Cam Attachment Angle

6

Adjust BlackHole Module

Through the U-shaped structure of the BlackHole module, the steering wheel can be quickly installed and removed. The reset cam has a trigger relationship with the protruding 'tongue' of the BlackHole module, observe when moving the turn signal lever.

💡 The BlackHole module can move left and right to improve turn signal lever reset cam sensitivity, adjust to the position that just allows the lever to reset, tighten the 4 fixing nuts on the back

Trigger Relationship Point

7

Installation Complete

Installation complete, ready for normal use. For advanced modifications (base-side quick release modification, original wheel quick release conversion), please refer to official video tutorials.