Thrustmaster T300/TGT Installation Guide

1

Prepare Modified Quick Release

Prepare the base-side modified quick release. Package includes: base-side modified quick release, original wheel modified quick release (set includes one, separate purchase 199 yuan each).

Modified Quick Release Parts

2

Connect Bracket

Connect the two parts of the bracket with two screws.

Bracket Connection Point

3

Install Fixing Clamp

Clamp the base fixing clamp with the aluminum bracket together, secure it, adjust the bracket height to be concentric with the shaft.

Clamp Fixing Position

4

Install Quick Release

Install the modified quick release (first plug in the PS/2 data plug), lock the quick release, tighten one anti-loosening screw.

⚠️ Screw cannot be too long, avoid hitting internal BlackHole structure

PS/2 Data Port

5

Adjust BlackHole Module

The BlackHole module can move left and right to improve turn signal lever reset sensitivity, tighten screws after adjustment to complete installation.

Adjustment Range

6

Original Wheel Modification (Optional)

The panel has three screws, unscrew them to separate the Thrustmaster threaded slow release. Replace with modified quick release, connect the middle data cable, fix with the included three screws.

💡 Some wheels need to open the outer shell to connect cables, some wheels have different ports, can use the included spare PS/2 port communication interface adapter

Data Cable Connection